Hey folks, it’s your friendly neighborhood mechanic, Matt, and I’m here to tell you all about replacing a water pump on a 2016 Ford Explorer.
Now, I know what you’re thinking, “Matt, why would I want to read about that?” Well, let me tell you a little story about the time I had to replace the water pump on my cousin’s Ford Explorer, and it was a wild ride!.
So, I had just finished up a long day of working on cars and I get a call from my cousin saying that his Ford Explorer was making a strange noise and the temperature gauge was skyrocketing.
Of course, I said I’d come take a look.
I arrive and pop the hood, and the first thing I notice is that the serpentine belt is loose and flopping around like a fish out of water.
I thought to myself, “Oh boy, this is going to be a doozy.”.
After a little investigating, I found out that the water pump was shot and needed to be replaced ASAP.
Now, I’ve replaced a few water pumps in my day, but this was my first time on a Ford Explorer, so I was a little nervous.
But, being the pro that I am, I sucked it up and got to work.
And let me tell you, it was a wild ride!.
Table of Contents
How Long Does It Take To Replace A Water Pump On A 2016 Ford Explorer?
The answer to this question depends on a few things, such as your mechanical ability and the tools you have on hand.
On average, it takes about 6-8 hours for a seasoned mechanic to replace the water pump on a 2016 Ford Explorer.
However, if you’re a beginner or don’t have all the necessary tools, it could take you a bit longer.
The most important thing is to take your time and follow the instructions carefully.
What Tools Do You Need To Replace A Water Pump On A 2016 Ford Explorer?
To replace the water pump on a 2016 Ford Explorer, you will need the following tools:.
- Floor jack and jack stands
- Metric socket set
- Wrench set
- Screwdriver set
- Pliers
- Fan clutch wrench
- Water pump pliers
- Cooling system pressure tester
It’s always a good idea to have a few extras on hand, such as rags, coolant, and a catch pan.
Trust me, you don’t want to be caught without these things halfway through the job.
Step By Step Guide To Replacing The Water Pump On A 2016 Ford Explorer
Here is a step-by-step guide to replacing the water pump on a 2016 Ford Explorer:.
- Raise the vehicle and support it with jack stands
- Remove the serpentine belt
- Remove the fan and fan clutch
- Drain the coolant from the systemBe sure to have a catch pan ready to collect the coolant, and dispose of it properly.Don’t pour it down the drain, that’s just no bueno!.
- Remove the water pump bolts and take out the old water pump
- Install the new water pump and tighten the bolts
- Reinstall the fan and fan clutch
- Reinstall the serpentine belt
- Refill the coolant system and bleed the air out of the system
- Start the engine and let it run for a few minutes to check for leaks
And that’s it! Just follow these steps and you’ll be back on the road in no time with a fully functioning water pump on your 2016 Ford Explorer.
My Personal Experience
Now, I won’t lie to you folks, this job was a bit of a challenge.
I’m used to working on older cars, so the newer technology on the Ford Explorer was a bit intimidating.
But, like I said, being the pro that I am, I was able to get it done and it turned out great.
My cousin was super happy, and I was happy to help.
Plus, I got to add another notch to my belt and increase my knowledge on Ford Explorers.
FAQ
Q: Can I replace the water pump on my 2016 Ford Explorer myself?
A: Yes, you can! As long as you have the necessary tools and the mechanical ability, you can definitely replace the water pump on your 2016 Ford Explorer yourself.
Just make sure to follow the instructions carefully and take your time.
Q: Is it necessary to drain the coolant system when replacing the water pump?
A: Yes, it is necessary to drain the coolant system when replacing the water pump.
This will allow you to have better access to the water pump and prevent coolant from spilling everywhere when you remove the old pump and install the new one.
Q: How much does it cost to replace the water pump on a 2016 Ford Explorer?
A: The cost to replace the water pump on a 2016 Ford Explorer will vary depending on where you go.
If you take it to a dealership or professional mechanic, you can expect to pay anywhere from $500 to $1000.
However, if you do it yourself, you will only need to pay for the cost of the water pump and the necessary tools, which will be significantly cheaper.
My Final Thoughts
Replacing a water pump on a 2016 Ford Explorer can be a bit of a challenge, but with the right tools and some determination, you can definitely get it done.
Just remember to take your time and follow the instructions carefully, and you’ll be back on the road in no time.
And who knows, you might even impress yourself with your newfound mechanical skills!.